Specialty Welding — SMAW
Shielded Metal Arc Welding
Versatile, field-proven stick welding for structural and high-stress applications that must withstand heavy loads and sustained stress.
Versatile welding, built for stress
Shielded Metal Arc Welding — commonly known as stick welding — uses continuous-fed consumable electrodes with alternating current, running in both automated and semi-automated configurations. Its flux-coated electrode shields the weld pool as it burns, forming a slag layer that protects the cooling joint.
SMAW’s versatility and simplicity make it adaptable across a wide range of applications and site conditions, and it remains our process of choice for structural and high-stress joints that must withstand heavy weights and sustained loading. One of the major factors behind a high-quality SMAW weld is welder skill — which is why every SMAW welder on our team is individually AWS certified.
- Continuous-fed consumable electrode with alternating current
- Versatile and adaptable across skill levels & site conditions
- Suited to heavy-load, high-stress structural joints
- NDE-verified on every project
How an SMAW joint is made
A flux-coated stick electrode process proven across decades of structural welding.
Electrode Selection
A flux-coated stick electrode is selected to match base metal and joint requirements.
Arc Strike
The welder strikes the arc directly between the electrode tip and the workpiece.
Flux Coating Shielding
The electrode’s flux coating burns to shield the arc and forming weld pool.
Slag Formation & Bead Deposit
Molten flux forms a protective slag layer over the newly deposited weld bead.
Slag Removal
The cooled slag layer is chipped and brushed away to expose the finished weld.
NDE Verification
Non-destructive examination confirms weld integrity before acceptance.
Equipment behind every SMAW weld
Field-proven hardware for structural and high-stress welding.
SMAW Power Source
Alternating current power source sized to electrode diameter and joint demand.
Coated Stick Electrodes
Flux-coated consumable electrodes matched to base metal chemistry.
Electrode Holder & Ground Clamp
Secure electrode control and reliable circuit grounding.
Preheat Equipment
Controlled preheating where material thickness or chemistry requires it.
Slag Chipping Hammer & Wire Brush
Slag removal tools for clean, inspection-ready weld surfaces.
NDE Inspection Station
Verification of every completed weld before sign-off.
Process capability at a glance
Where SMAW goes to work
Trusses & Structural Metal Products
Load-bearing structural connections built to withstand sustained stress.
Tanks & Production Equipment
Durable, field-provable welds on tanks and production hardware.
Heavy Structural Fabrication
Structural fabrication requiring durability across variable site conditions.

