Specialty Welding — GTAW
Gas Tungsten Arc Welding
Precision, non-consumable electrode welding that delivers the highest-quality, most corrosion-resistant joints in our welding portfolio — for thin-wall pipe, tubing, and exotic alloys.
Precision welding for critical joints
Gas Tungsten Arc Welding uses a non-consumable tungsten electrode, a constant-current power source, and a separate filler material to produce the joint. Because the electrode itself is never consumed, the welder maintains precise control over heat input and puddle formation — making GTAW the slowest but most exacting process in our welding capability.
That precision translates directly into weld quality: GTAW joints exhibit higher resistance to corrosion and cracking than GMAW or SMAW welds, driven by tightly controlled flux and filler management. We run GTAW both manually and on automated orbital welding heads, depending on joint access and repeatability requirements.
- Non-consumable tungsten electrode with separate filler & shielding gas
- Manual & automated (orbital) execution
- Superior corrosion & crack resistance vs. GMAW/SMAW
- Qualified on stainless, aluminum, magnesium, copper & Inconel
How a GTAW joint is made
A slower, more controlled arc process that trades speed for weld quality.
Joint & Tungsten Prep
Base metal is cleaned and the tungsten electrode is ground to the geometry required for the joint.
Arc Initiation
The arc is struck using high-frequency start or lift-arc technique, without touching the electrode to the work.
Puddle Formation
The tungsten electrode sustains a stable arc that melts the base metal without itself being consumed.
Filler Addition
Filler rod is fed manually or via automated wire feed directly into the leading edge of the puddle.
Gas Shielding & Cooling
Inert argon shielding protects the puddle through arc travel and solidification.
Equipment behind every TIG weld
Precision hardware matched to a precision process.
TIG Power Source
Constant-current DC or AC power source with precise amperage control.
Tungsten Electrodes
Non-consumable electrodes ground to the joint’s required geometry.
Gas Lens / Cup
Shapes the shielding gas flow for stable, turbulence-free coverage.
Foot / Torch Amperage Control
Real-time amperage adjustment during welding for puddle control.
Orbital Welding Head
Automated tube and pipe welding for consistent, repeatable root passes.
Filler Wire Feeder
Automated filler feed for mechanized and orbital applications.
Argon Shielding Gas System
Inert gas supply and flow control protecting the weld puddle.
Water-Cooled Torch
High-amperage torch cooling for extended-duration welding.
Process capability at a glance
Where GTAW goes to work
Thin-Walled Process Piping
Precision root and fill passes on thin-wall pipe and tubing runs.
Marine & Chemical Vessels
Corrosion-resistant joints for marine equipment and chemical processing vessels.
Root-Pass on Critical Pipe Welds
GTAW root passes ahead of fill and cap passes by other processes on code-critical piping.

