Finned Tube Supply — Low Fin Tube
Low Fin Tube
Fins cold-rolled directly from the base tube wall itself — no separate fin material, no bond line, for the highest mechanical and corrosion resistance in shell-and-tube service.
One continuous material, no bond to fail
Low fin tube is manufactured using cold rolling of the fin directly from the base tube itself, on a dedicated fin-rolling machine. Rather than attaching a separate fin component, the fin material is formed from progressive cold-rolling passes of the tube wall material — meaning there is no bond line between fin and tube to fail in service.
Because fin and tube are one continuous material, low fin tube offers excellent mechanical resistance and corrosion protection, and is produced in both straight and U-bend configurations to suit shell-and-tube heat exchanger and oil cooler geometries.
- Fins rolled directly from the base tube material — no separate fin component
- No bond line to fail — fin and tube are one continuous material
- Available in straight & U-bend configurations
- Fin density up to 26 FPI (1023 FPM)
How low fin tube is made
A cold-rolling process that forms the fin from the tube itself.
Base Tube Selection & Prep
Base tube material and dimensions are selected and prepared for rolling.
Cold Rolling Setup
The tube is loaded onto a dedicated fin-rolling machine.
Progressive Cold Rolling
Fin geometry is formed from the tube wall material in successive rolling passes.
Straight or U-Bend Forming
Finished tube is left straight or formed into U-bend configuration as required.
Dimensional & Pressure Testing
Fin geometry, wall thickness, and pressure integrity are verified against specification.
Equipment behind every low fin tube
Cold-rolling hardware that forms fin directly from the tube wall.
Cold Fin-Rolling Machine
Progressively rolls fin geometry from the base tube wall material.
Base Tube Prep Line
Prepares tube dimensions and surface ahead of cold rolling.
U-Bend Forming Tool
Forms finished tube into U-bend configuration where required.
Dimensional Gauging Station
Verifies fin height, density, and wall thickness against specification.
Hydrostatic Test Rig
Confirms pressure integrity of the finished tube.
Material Certification Station
Issues material and dimensional certification with every shipment.
Process capability at a glance
Where low fin tube goes to work
Oil Coolers
No-bond-line fin construction for reliable oil cooler service.
Shell and Tube Heat Exchangers
Straight and U-bend low fin tube for shell-and-tube exchanger bundles.
Fluid-to-Fluid Heat Exchangers
Corrosion-resistant, mechanically robust finning across fluid heat exchanger duty.

