Finned Tube Supply — Welded Fin Tube
Welded Fin Tube
High-frequency electric-resistance-welded fin, spiral- or longitudinally-wound and metallurgically bonded to the base tube — for continuous, high-duty heat recovery in boilers, economizers, and waste heat systems.
A fused bond, not a mechanical one
Welded fin tube is manufactured by helically or longitudinally winding a strip of steel or alloy fin material around the base tube, then fusing it in place with high-frequency electrical current. The current heats the strip and the tube’s outer surface, using the skin and proximity effect, to a plastic or semi-molten state; applying pressure as the strip winds on completes a solid-phase metallurgical weld with no filler material and virtually no gap between fin and tube.
That fused, full-length bond carries heat far more efficiently than a mechanically retained fin, and resists loosening under the thermal cycling and vibration that heat recovery equipment sees in continuous service. We produce both solid and serrated fin profiles, and both helical (HFRW) and longitudinal (RSW) fin geometries, across a wide range of base tube and fin materials.
- Fin strip helically or longitudinally wound and welded by high-frequency electric resistance
- Metallurgical (fused) bond between fin and tube wall — not mechanical retention
- Solid or serrated fin profiles to suit gas-side fouling and pressure drop
- Wide material range from carbon steel to nickel alloys and duplex steel
How welded fin tube is made
A high-frequency fusion process built for continuous, high-duty heat transfer.
Base Tube Prep
Tube surface is cleaned and prepared ahead of fin winding and welding.
Fin Strip Feed & Forming
Steel or alloy fin strip is fed and formed to a solid or serrated profile.
High-Frequency Induction Heating
Induction current heats the strip and tube surface to a plastic or semi-molten state via the skin and proximity effect.
Weld Under Pressure
Heated edges are fused together under controlled pressure as the strip winds continuously onto the tube.
Cooling & Dimensional Inspection
Weld bond quality, fin height, and pitch are verified against specification.
Equipment behind every welded fin tube
High-frequency fusion hardware built for continuous production runs.
High-Frequency Induction Welding Head
Fuses fin strip to the tube wall via skin-effect induction heating.
Fin Strip Feed & Forming Line
Feeds and forms fin strip to solid or serrated profile ahead of welding.
Base Tube Prep Line
Prepares tube surface and dimensions ahead of fin welding.
Serration Cutting Tool
Cuts the serrated fin profile where gas-side turbulence or reduced pressure drop is required.
Weld Pressure Roll Set
Applies controlled pressure to complete the fusion weld as the strip winds on.
Dimensional & Bond Inspection Station
Verifies weld integrity, fin height, and pitch on every production run.
Process capability at a glance
Where welded fin tube goes to work
Boiler Economizers & Superheaters
High-duty welded fin for continuous boiler heat recovery service.
Waste Heat Recovery & HRSG
Fused-fin tube built for the thermal cycling of waste heat recovery units.
Air-Cooled Heat Exchangers
Welded fin tube for petrochemical and oil & gas air cooler bundles.

