Heat Transfer Equipment
Reciprocating Gas Compressor Packages
Engineered, skid-fabricated reciprocating compression packages for upstream, midstream, and industrial natural gas handling — built, tested, and field-supported for continuous duty.
Reciprocating compression built for continuous, high-differential-pressure duty
Fintelius engineers and fabricates reciprocating natural gas compressor packages — the compressor frame and cylinders, driver, suction scrubbers, pulsation dampening, cooling, and controls — skid-mounted, piped, and wired as a single tested unit ready for site installation.
Reciprocating technology is matched to services that call for high compression ratios and stable performance across a wide range of suction pressures and gas compositions, from wellhead gas lift through pipeline boosting, and is engineered and shop-tested before it ever reaches site.
- Single, two, three & four-stage reciprocating packages, 90 – 5,000+ hp
- Discharge pressures to 1,650 psig; capacities from 50 to 6,000+ CFM
- Skid-mounted with integrated scrubbers, coolers, pulsation bottles & PLC controls
- Engineered, built & tested to API 618, ISO 13631, ASME VIII Div. 1 & ANSI B31.3
From process data to a commissioned package
Every reciprocating compression package follows the same disciplined path from engineering through startup.
Process & Sizing Study
Suction/discharge pressures, gas composition, and flow rate are used to size frame, cylinders, and stage configuration.
Frame & Driver Selection
Compressor frame, cylinders, and gas engine or electric-motor driver are matched and coupled for the duty point.
Skid Fabrication & Piping
Scrubbers, coolers, pulsation bottles, and process piping are fabricated and mounted onto a structural skid base.
Controls & Instrumentation
PLC/SCADA controls, safety shutdown systems, and field instrumentation are wired and integrated with the package.
Shop Run & Commissioning
The package is mechanically run, leak- and pressure-tested, then commissioned and started up in the field.
Package components engineered for continuous field duty
Every reciprocating package is built around proven frame, driver, and skid components sized to the application.
Reciprocating Compressor Frame
Heavy-duty frames and cylinders sized for 1- to 4-stage compression across a wide ratio range.
Gas Engine & Electric-Motor Drivers
Driver selection matched to site fuel availability, power access, and duty cycle.
Suction Scrubbers
Liquid knockout ahead of each compression stage protects cylinders from carryover and slugging.
Inter-Stage & After-Coolers
Air-cooled or fin-tube heat exchangers control discharge gas temperature between and after stages.
Pulsation Bottles & Dampeners
Suction and discharge pulsation vessels sized per API 618 to control piping vibration and pressure pulsation.
Structural Skid Base
Fabricated steel skid carries compressor, driver, vessels, and piping as one transportable, alignable unit.
PLC & Shutdown Controls
Programmable controls with field instrumentation manage loading, alarms, and emergency shutdown.
Lubrication & Utility Systems
Force-feed cylinder and frame lubrication, cooling water, and instrument air systems integrated on-skid.
Exchangeable Cylinder Liners
Sliding-fit, replaceable liners simplify maintenance and extend cylinder service life in the field.
Capability at a glance
Where our reciprocating packages go to work
Gas Lift & Gas Gathering
Wellhead and gathering-system compression supporting artificial lift and low-pressure field collection.
Gas Re-Injection & Boosting
High-ratio compression for re-injection, CBM extraction, and pipeline booster stations.
Vapor Recovery & Flare Gas
Low-pressure vapor and flare gas recovery packages that reduce flaring and recover saleable gas.

