Finned Tube Supply — G-Type Fintube
G-Type Fintube / Embedded Fintube
Aluminum fin wound and mechanically embedded into a helical groove ploughed into the base tube wall — for the highest fin stability and thermal transfer efficiency in our finned tube range.
Mechanically locked fin, no bond to fail
G-Type, or embedded, fintube is manufactured by ploughing a helical groove 0.2–0.3 mm deep into the outside of the base tube wall. Critically, the metal is merely displaced, not removed — the displaced material is then rolled back alongside the groove as an aluminum fin is wound into it under tension, mechanically locking the fin in place without any adhesive or braze bond.
That metal-to-metal mechanical retention gives G-Type fintube the most consistent fin-to-tube wall contact of any finning process we offer, enabling operation up to 450°C with superior thermal transfer efficiency and fin stability — at an optimal cost relative to fully extruded fin.
- Fin embedded into a helical groove machined into the tube wall
- No adhesive or braze bond — metal-to-metal mechanical retention
- Operating capability up to 450°C
- Superior fin stability & thermal transfer efficiency
How G-Type fintube is made
A grooved, mechanically-locked fin process built for high-temperature stability.
Helical Groove Forming
A 0.2–0.3 mm helical groove is ploughed into the tube wall, displacing rather than removing metal.
Displaced Metal Rolling
The displaced metal is rolled back alongside the groove, forming the retention lip for the fin foot.
Fin Winding Under Tension
An aluminum fin strip is wound helically into the groove under controlled tension.
Groove Embedment
The fin foot is embedded and mechanically locked into the groove by the rolled-back metal.
Dimensional & Bond Inspection
Fin height, density, and mechanical retention are verified against specification.
Equipment behind every embedded fin tube
Precision grooving and winding hardware for a mechanically locked fin.
Groove-Forming Tool
Ploughs the precision helical groove into the base tube wall.
Tension-Controlled Fin Winder
Winds the aluminum fin strip into the groove under consistent tension.
Aluminum Fin Strip Stock
Fin material sized and prepared for the groove profile.
Displaced-Metal Rolling Head
Rolls the displaced tube metal back over the fin foot for mechanical lock.
Dimensional Gauging Station
Verifies fin height, pitch, and groove depth against specification.
Bond / Pull Test Rig
Confirms fin retention strength on sample lengths from every production run.
Process capability at a glance
Where G-Type fintube goes to work
Oil & Gas Refineries & Gas Treatment
High-temperature finned tube for refinery and gas treatment air coolers.
Power Plants & Steel Manufacturing
Stable, high-temperature fin performance for power and steel process cooling.
Air Conditioning & Compressor Cooling
Reliable fin retention for HVAC and compressor cooling duty.

