Fabrication Services — Finned Tube Supply
Finned Tube Supply
Eight finning technologies, one source — embedded, wrap-on, overlapped, knurled, extruded, low-fin, welded, and studded tube manufactured for heat exchangers, air coolers, and process cooling across every major alloy.
The right fin, matched to the service
Finned tubes multiply the effective heat transfer surface of a bare tube, and the right fin process depends on operating temperature, corrosion environment, tube material, and budget. Fintelius manufactures across six distinct finning technologies — from mechanically embedded and knurled fin to fully cold-extruded and integrally rolled fin — so every project gets the process that fits its service conditions, not a one-size-fits-all fin.
Every tube is manufactured to dimensional and material specification, with fin height, density (FPI), and base tube alloy selected to match the heat duty, fouling environment, and mechanical loading of the application.
- Eight finning technologies matched to temperature, corrosion & cost requirements
- Fin materials in aluminum, copper & steel; base tubes to titanium & Inconel
- Fin heights from 1/4″ to 1″, 4–26 fins per inch density
- Straight & U-bend tube configurations up to 60 ft length
How we match a fin type to your application
Every finned tube order starts with the operating conditions, not the catalog page.
Operating Condition Review
Temperature, pressure, and service fluid define which finning process can be used.
Material Selection
Base tube and fin alloy are selected for corrosion resistance and mechanical duty.
Fin Process Selection
Embedded, wrap-on, overlapped, knurled, extruded, or low-fin — matched to the application.
Manufacture & Dimensional QC
Tubes are finned and inspected against fin height, density, and bond specifications.
Testing & Certification
Pressure testing, dimensional verification, and material certification accompany every shipment.
Eight processes, one supply source
Explore each finned tube type in detail.
G-Type Fintube / Embedded Fintube
Aluminum fin mechanically embedded into a helical groove for maximum fin stability.
L-Foot Fin / Wrap-On Fin
Tension-wound fin with a formed foot — a cost-effective option for low-temperature service.
LL-Foot Fin / Overlapped L
Stepped double-L fin with complete base-tube coverage for corrosion protection.
KL Footed Fin / Knurled L Footed Fin
L-foot fin knurled into a knurled tube surface for enhanced bonding and vibration resistance.
Extruded Fin Tube
Cold-extruded aluminum fin for the strongest fin-to-tube bond in our range.
Low Fin Tube
Fin rolled directly from the base tube wall — no bond line, no separate fin material.
Welded Fin Tube
High-frequency resistance-welded fin, fused to the tube for continuous high-duty heat recovery.
Studded Fin Tube
Resistance-welded solid studs built to survive heavy fouling and aggressive mechanical cleaning.
Capability at a glance
Where our finned tube goes to work
Oil & Gas Refineries & Gas Treatment
Finned tube bundles for refinery air coolers, gas treatment, and process heat recovery.
Power Plants & Air-Cooled Condensers
High-duty finned tube for power generation cooling and condensing service.
HVAC, Compressor & Process Cooling
Finned tube for compressor coolers, HVAC coils, and general process cooling duty.

